适用种类 Applicable type
●电气控制箱 ●激光加工控制箱 ●电火花加工机械控制箱 ●通信设备
●Electric control cabinet ●Control cabinet of laser machine ●Electric spark control cabinet of machine ●Communication equiment
特性与功能 Features and Functions
●密闭型设计，内外空气隔绝，防止外部尘埃、油物、湿气等进入箱内
●采用压缩机强制冷却，控制箱内温度和湿度
●提高电箱内电气元件使用寿命
●Enclosed desing to isolate the air from outside to prevent from dust, oil mist, moisture
●Use air compressor to control temperature and humidity in the cabinet
●Prolong service life of control cabinet


备注 Remark
●制冷能力是在环境温度35℃，电箱内温度35℃的条件下测得。●Cooling capacity base on the ambient temperature 35℃, inner cabinet temperature 35℃.
●必须保证冷气机通风良好，否则会影响制冷效果甚至发生故障。 ●Marking sure that airiness is good to make cooling effect better.
●定期清理过滤网，建议一月一次。 ●Cleaning filter net once a month.
●温控器出厂时已设定工作温度范围在30 33℃之间，严禁调低工作温度。 ●The working teperature of thermostat has been a djusted within 30 33℃ before dispatch.
●冷气机应垂直安装，倾斜度＜5°。 ●The cooler may be installed vertically. The inclination＜5°.
●冷气机使用环境温度在38℃以下，无粉末，无腐蚀性气体，周围无热源的场所。●The ambient temperature should be less 38℃. The cooler should be away from dust and corrosive gas as well as heat source.
●参数表内为本公司标准机型，本公司接受客户特殊订货。●Chiller tyhpe on the above table is standard, speical order on requst.